Hi Kate,
As to Jennifer's suggestion on using Cyclododecane to prevent further
running of the embroidery.  Gretchen Guidess, a Winterthur intern with
us at the V&A last year, did a treatment on a small crib quilt with
fugative brown embroidery using CCD to mask the embroidery and allow the
quilt to be wet cleaned.  The results were very gratifying.  You need a
steady hand and lot of patience to coat the embroidery.  We use an
electic Kitsky - a Ukranian egg decorating tool, fitted with a fine nib
to apply the CCD.  I believe you can get them from the Caning Store in
Berkeley, or from the Ukranian Gift Shop in Minnesota.

Can I suggest;
Cyclododecane: An examination of the Rate of Sublimation from Various
Textile Substrates.  by Sarah Confer.  MA thesis Queen's University,
Canada.  May 2006

Which may reassure you as to the safety of using CDD.  I wonder aloud
if you could try a chelator with the run dye if you can successfully
mask the embroidery?

Joanne Hackett
V&A


>>> Jennifer Barnett <[log in to unmask]> 26/06/2010 22:15 >>>
Battling on...
I strongly advise you to test the pH reactions of the threads  
(samples) as there may be a significant difference which should be  
helpful in fixing or releasing. Presumably the dyes in question are  
early synthetic dyes. See these articles:

	Scharff, A.B., 'Synthetic dyestuffs for textiles and their
fastness  
to washing', ICOM CC,12 triennial meeting, Lyon: 	preprints Vol.
II,  
ed. J. Bridgeland, James & James, London (1999) 654-660

	Barnett, J.C., 'Synthetic organic dyes, an introductory
literature  
review of their use and related issues in conservation', 	Reviews
in  
Conservation, IIC, London, nr. 8, 2007, pp. 67-77

You could also try isopropyl alcohol to move the dye stain. This would 

also affect the dye on the threads so a vaccuum table/suction disc  
would be required.

Or you could use cyclododecane to mask off the threads while the  
woollen fond is being treated.

	Scharff, A.B. 'The use of cyclododecane for the fixing of
bleeding  
dyes on paper and textiles: a critical evaluation of 	application  
methods', Dyes in History and Archaeology, 19, (2000) 149-148

Yet another thing to consider is the effect of losing more dye from  
the thread, provided it can be rinsed away or encouraged to deposit  
somewhere else. This is not always as bad as it seems when there is no 

apparent loss in colour afterwards. It is a risk. Would some colour  
loss be more or less acceptable than dye stains?

That's it as far as my memory banks are concerned.

Best wishes and good luck!

Jennifer






On 26 Jun 2010, at 16:47, Kate Sahmel wrote:

> Thanks Jennifer- this sounds like a great method to try in the
future
> for cleaning samplers with just slight dye bleed in water.
> Unfortunately, the dye on the silk embroidery of this sampler still
> releases quite readily in water alone (although sadly not on the
wool)
> which is why I haven't tested different pH solutions on the thread-
> I'm not sure that any difference would be clearly evident.  However,
> perhaps something to experiment with (on fiber samples) without any
> danger to the wool.
>
> Best,
> Kate
>
>
> On 6/26/10, Jennifer Barnett <[log in to unmask]> wrote:
>> Tricky. I have not had much experience with embroidery on wool  
>> which does
>> indeed limit the pH possibilities as far as treatment. You do not  
>> mention
>> whether pH tests were carried out on samples of thread to determine 

>> at which
>> (approx.) pH the dye runs. This is vital to know.
>>
>> Have you though of using a vaccuum table? Some do not like the  
>> appearance of
>> the finished result as the embroidery tends to stand up too much  
>> from the
>> fabric (strong suction on the fabric).
>>
>> I have had the experience of threads on a yellowed and lightly  
>> soiled 1940s
>> cotton sampler that tests showed ran in neutral detergents, acidic 

>> and
>> alkaline solutions and just a little in water alone. I was sharing
a
>> workshop with a paper conservator and saw how paper was nearly  
>> always dried
>> between blotters that were sandwiched between thick woollen felt  
>> then topped
>> with a piece of multiplex wood with weights on top of the whole  
>> lot. This
>> was to maximise contact of the blotters with the paper object to  
>> pick any
>> migrating colouring matter and to ensure that it dried perfectly  
>> flat.
>>
>> Not having a vaccuum table at hand, I decided to 'wash' the sampler 

>> in water
>> with added CMC to prevent soil deposition, rinse thoroughly then  
>> dry it
>> using the paper object method (overnight). Fantastic result. The  
>> embroidery
>> was not flattened at all and there were no haloes of dye on the  
>> sampler,
>> only on the blotter, and then not so much. The weighting system  
>> retained the
>> shape of the sampler beautifully as well. While not as clean as it 

>> could be,
>> it looked refreshed and very natural, if that is the right word.  
>> Pinning out
>> and applying weighted glass plates always leave their marks on  
>> cellulose
>> based samplers. Pinning out wool would be a very delicate operation 

>> in any
>> case due to its stretchiness.
>>
>> This drying method also saved a lot of time (pinning, adjusting  
>> pinning as
>> it dries, hovering with hair dryer in hand), which, despite what  
>> many of my
>> old colleagues may still think, is an important consideration, even 

>> more so
>> in private practice. This notion became even more important during
my
>> experience of working 18 years in the Netherlands where many owners 

>> of
>> samplers were outraged at the cost of treating 'a bit of old rag'
or
>> 'something that didn't cost me anything'. End of short rant.
>>
>> Hope this helps in some way.
>>
>> Jennifer Barnett
>>
>> ex-textile conservator/lecturer
>> now translator Dutch-Eng and editor/proof-reader
>>
>> 'Tournebise'
>> La Goutte, rte de Dancé
>> FR -  Bully 42260
>> tel  +33 4 7765 2011
>> [log in to unmask] 
>>
>> http:/www.proz.com/profile/847667
>>
>>
>>
>>
>>
>>
>>
>> On 23 Jun 2010, at 20:53, Kate Sahmel wrote:
>>
>>> I am working on a 19th century English sampler with silk  
>>> embroidery on
>>> a wool ground.  The sampler is in good/fair condition, but there
is
>>> extensive dye bleed into the wool ground, mostly from the green
and
>>> dark pink silk embroidery threads.  Testing has shown that the dye 

>>> is
>>> still fugitive on the green silk thread, but so far none of the
>>> aqueous solutions tested moves the dye on the wool.
>>>
>>> I am considering trying to raise the pH slightly to see if that  
>>> helps
>>> to release the dye, but I am not sure how much I can raise the pH
>>> without damaging the fibers.  Unfortunately the dye bleed has
likely
>>> been there a long time (40 years?), but I would still like to try
a
>>> few more things before giving up.  Has anyone had success with
>>> removing dye bleed on wool?
>>>
>>> Thanks,
>>>
>>> Kate Sahmel
>>> Andrew W. Mellon Fellow in Costume and Textiles Conservation
>>> Philadelphia Museum of Art
>>> [log in to unmask] 
>>> 215-684-7578
>>>
>>

______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email 
______________________________________________________________________

- --------------------------------------------------------------
Quilts 1700-2010 
Supported by the Friends of the V&A
Until 4 July 2010 at V&A South Kensington
Book now on www.vam.ac.uk

Horace Walpole and Strawberry Hill
6 March – 4 July 2010 at the V&A South Kensington
Book now on www.vam.ac.uk 

Sit Down: Seating for Kids
Until 5 September 2010 at V&A Museum of Childhood
Admission free


Keep in touch - visit www.vam.ac.uk and sign up for our regular e-newsletter

  --------------------------------------------------------------

The information contained in this message is confidential and intended only for the individual named above. If you are not the intended recipient,or responsible for delivering it to the intended recipient you are hereby notified that any dissemination, distribution, copying, or disclosure of this information is prohibited and may be unlawful. If you have received this communication in error, please notify us by telephone on 020 7942 2353. This message has been scanned for viruses by MessageLabs Email Security System www.messagelabs.com/email 

______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email 
______________________________________________________________________