Subject: | |
From: | |
Reply To: | |
Date: | Tue, 8 Mar 2011 16:59:27 -0000 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Many Thanks to all, but as I understand it- it is cutting the aluminium
that is the fire risk. But for large boards I hope we will continue be
able to get it cut externally as it is a good lightweight and rigid
board that doesn't warp.
We have used Cellite 620 and Tycore with wood strips inserted around the
edges too to enable screwing into (as opposed to using a wood filler)
which works but is expensive / fiddly but still an option.
I am still after that perfect board for small textile mounts that you
can screw into without covering / sealing or inserting strips around the
edges where it isn't cost-effective to have the odd board cut or
prepared externally.
Pippa Cruickshank
The British Museum
-----Original Message-----
From: Textile Conservators [mailto:[log in to unmask]] On Behalf
Of Scottish Conservation Studio
Sent: 08 March 2011 16:46
To: [log in to unmask]
Subject: Re: Boards for Pressure Mounting Textiles
There are lots of pure aluminium honeycomb panels and
aluminium/polyethylene panels out there, eg
http://www.multipaneluk.co.uk/?gclid=CL_5lN2xv6cCFRRC4Qod8Cn__Q
They are expensive but very strong.
Forex has passed Oddy tests and as a non-plasticised PVC is stable
especially in museum environments and has a long performance lifespan,
probably exceeding the time the board will be wanted for display etc. It
does sag under stress with time, so needs vertical or horizontal display
or some form of support eg aluminium struts on the back. There are
environmental issues with manufacturing and recycling PVC but this is
true of aluminium, glass fibre, epoxy resins, and MDF type boards too.
You could use acid-free paper honeycomb boards with say 20mm of the
honeycomb taken out along the edge and a Forex strip glued in for taking
screws? The Forex, if glued and fixed at the corners, would act also as
an edge support and hidden frame? Fiddly but effective.
Will Murray
The Scottish Conservation Studio
On 08/03/2011 16:23, Pippa Cruickshank wrote:
> Can anyone recommend a board suitable for pressure mounting - where
you
> need to screw in to the sides of the board.
>
> With the associated fire risks of cutting the aluminium honeycomb
> Aerolam / Hexlite / Cellite 620 board we are no longer able to get it
> cut in-house, and although the manufacturer / supplier in the UK will
> cut it at a cost it would not be cost effective for small boards. ( We
> used to fill the edges with an approved wood filler in order to be
able
> to screw into the sides).
>
> I wondered about Forrex Classic board but there still seem to be some
un
> answered concerns over the pvc content in the long term.
>
> Apart from covering and sealing wood or MDF with Moistop or Melinex
does
> anyone have any other suggestions of possible alternative boards to
> Cellite 620 that you can screw into?
>
> Many Thanks
>
> Pippa Cruickshank
>
> Textile and Fibres Studio
>
> Department of Conservation and Scientific Research
>
> The British Museum
>
> *AFGHANISTAN: CROSSROADS OF THE ANCIENT WORLD*
>
> Until 3 July 2011
> BOOK TICKETS +44 (0)20 7323 8181
> _www.britishmuseum.org_
>
> *BECOME A MEMBER*+44 (0)20 7323 8195
> _www.britishmuseum.org/membership_
>
>
>
> Connect with the British Museum online:
> _www.facebook.com/britishmuseum_
> _www.twitter.com/britishmuseum_
> _www.youtube.com/britishmuseum_
>
--
The Scottish Conservation Studio LLP
Hopetoun House
South Queensferry
West Lothian
EH30 9SL
Tel 0131 331 5875
Email: [log in to unmask]
Web: www.scottishconservationstudio.co.uk
Registered in Scotland Company No SO300545
VAT No 865 3202 31
|
|
|